EMG 10-REL/KSR-G 24/ 1-LC AU

https://www.phoenixcontact.com/us/products/2940087 Relay Module - EMG 10-REL/KSR-G 24/ 1-LC AU - 2940087 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Relay module, with soldered-in miniature switching relay, gold contact for small loads, 1 N/O contact, input voltage 24 V DC The illustration shows version EMG 10-REL/KSR-G 24/1-LC AU, with soldered-in miniature switching relay Product Features  Safe isolation according to DIN EN 50178 between coil and contact  Integrated input circuit and interference suppression circuit     Key commercial data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 37.68 GRM Custom tariff number 85364190 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 10.6 mm Height 75 mm Depth 53.5 mm 10/10/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2940087 Relay Module - EMG 10-REL/KSR-G 24/ 1-LC AU - 2940087 Technical data Ambient conditions Ambient temperature (operation) -20 °C ... 40 °C Ambient temperature (storage/transport) -20 °C ... 70 °C Coil side Nominal input voltage UN 24 V DC Input voltage range in reference to UN 0.8 ... 1.1 Typical input current at UN 21 mA Typical response time 7 ms Typical release time 11 ms Operating voltage display Yellow LED Protective circuit Protection against polarity reversal Polarity protection diode Free-wheeling diode Damping diode Contact side Contact type Double contact, 1 N/O contact Contact material AgPd60, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Maximum inrush current 0.2 A Min. switching current 20 µA Limiting continuous current 0.5 A Interrupting rating (ohmic load) max. 5 W (at 24 V DC) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 125 V AC Limiting continuous current 2A Maximum inrush current 2A Interrupting rating (ohmic load) max. 29 W (at 24 V DC) 29 W (at 48 V DC) 29 W (at 60 V DC) General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 Mechanical service life Approx. 2 x 10 cycles Standards/regulations IEC 60664 7 EN 50178 IEC 62103 Rated surge voltage / insulation 4 kV / basic insulation 10/10/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2940087 Relay Module - EMG 10-REL/KSR-G 24/ 1-LC AU - 2940087 Technical data General Rated insulation voltage 260 V AC Pollution degree 2 Surge voltage category III Mounting position any Assembly instructions In rows with zero spacing Connection data Connection method Screw connection Stripping length 8 mm Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG/kcmil max 12 Conductor cross section AWG/kcmil min. 24 Screw thread M3 Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371001 ETIM ETIM 2.0 EC000196 ETIM 3.0 EC000196 ETIM 4.0 EC000196 ETIM 5.0 EC000196 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 10/10/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2940087 Relay Module - EMG 10-REL/KSR-G 24/ 1-LC AU - 2940087 Classifications UNSPSC UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 Approvals Approvals Approvals UL Recognized / cUL Recognized / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  GOST  cULus Recognized  Accessories Accessories 10/10/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2940087 Relay Module - EMG 10-REL/KSR-G 24/ 1-LC AU - 2940087 Accessories Marking material - EMG-SGKS 10 - 2947585 Equipment marker, narrow     Drawings Connection diagram 13 14 A1 A2 Circuit diagram 13 14 A1 A2 Circuit diagram 13 A1 + A2 - 14 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 5 / 5